| |
| VoIP
GSM Gateway / VoIP CDMA Gateway/VoIP UMTS Gateway MV-370 is a VoIP
GSM Gateway for call termination (VoIP to GSM ) and origination (GSM to VoIP).
Support Asterisk,SIP Proxy Server,VoipBuster.
Catalog (230KB)
User manual Download(1.63MB) New 2008/4
Update
Firmware: How
to update? Where to buy?
|  ¡@¡@ 
|
 |
| | | | <<Major
Function>> | |
| 1. |
VoIP(SIP)¡BGSM conversion.(MV-370) | | 2. |
VoIP(SIP)¡BCDMA conversion.(MV-370C) - CDMA 2000(800MHz)
MV-370C:
mobile to lan doesn't have 2 stage dialing-free mode.
When calling party call
MV-370C Ruim card,the calling party will hear dial tone and enter destination
number. (This feature is not available,The other functions are the same with MV-370.) |
| 3. | VoIP(SIP)¡BUMTS
conversion.(MV-370U)
for all world and Japen (SoftBank Mobile)
MV-370U:
mobile to lan 2 stage dialing-free mode.
When calling party call
MV-370U sim card,the calling party will hear dial tone and enter any destination number.
**How to differentiate mobile to lan-2 stage dialing is available?**
UMTS Mobile call UMTS Mobile: when the called party answer, the calling party press any DTMF.
If the called party hear DTMF Voice,this feature is available;contrariwise** |
| 4. | 50 sets
of LAN --> MOBILE routes setting¡A50 sets of MOBILE --> LAN routes setting.
-Support
one stage diaing
*When lan phone and MV-370
both register SIP proxy Server or Asterisk or VoipBuster,you can dial any destination
number from lan phone directly.
*Please
note,SIP proxy Server,Asterisk need to have the route of destination number. VoipBuster
need to have credit.
-Support assigned mode and free mode-two stage dialing |
| 4. | Voice response for setting and status(dial
in from mobile). | | 5. | For call termination
(VoIP to GSM) and origination (GSM to VoIP). |
| 6. | Standard SIP(RFC2543¡ARFC3261) protocol¡Acommunicates with other
gateway or PC |
| 7. |
Receive
SMS and Send SMS |
| 8. | All functions can
be set on web. |
|
| | | <<Specification>> | |
| | | |
| <<Application>> |
|
<<Example
of Application>> | 1.
How to connect with VoipBuster
Please register to voipbuster first.
(1)
When you go oversea,you can receive local call without roaming fee.
When you go oversea,you insert your local sim in the MV-370
And set mobile
to lan *,your overseas's phone number.
When you are in oversea,all incoming
call of your local mobile will transfer to your mobile number in oversea auto.
So you don't need to pay the roaming fee.
voipbuster's rate is very cheap.(landline
is free. mobile rate is cheap) http://www.voipbuster.com
(2)When
you out of office,you can call any international phone number via MV-370.
(If the destination number is landline,you only need to pay the local gsm cost.)
set mobile to lan *,* in the MV-370
When you out of office,you can call the
mobile of MV-370.
Then hear dial tone,you can dial any phone number.(even
international call. landline is free. mobile rate is cheap)
(3)
You can dial the MV-370's mobile number and transfer to voipbuster account.
set route- mobile to lan speed dial.
Example:
NUM ¡@Name¡@ ¡@ URL
0 ¡@¡@¡@Rebecca
¡@rebecca_portech
1 ¡@¡@¡@jenny ¡@ ¡@ jenny0922
When you dial mobile number
of MV-370,you will hear dial tone.
enter 0,will divert to voipbuster account:rebecca_portech
enter 1,will divert to voipbuster account:jenny0922 2.When
you call the no.1 MV-370 gsm number,it will provide dial tone and you enter a
destination number.
¡@Then no.2 MV-370 will dial this number and connect
no.1 MV-370: mobile
to lan set route table *,*
no.2 MV-370:lan to mobile set route table *,#
Additionally, two pcs MV-370 both need to register proxy server.
And proxy
server set the route that the prefix of destination number dial out from no.2
MV-370.
When you call the no.1 MV-370 gsm number,it will provide dial tone
and you enter a destination number.
Then no.2 MV-370 will dial this number
and connect. 3.
When you call the no.1 MV-370 gsm number,no.2 MV-370 will dial this specific number
and connect
no.1 MV-370: mobile to lan set route table *,specific destination
number
no.2 MV-370:lan to mobile set route table *,#
Additionally, two
pcs MV-370 both need to register proxy server.
And proxy server set the route
that the prefix of destination number dial out from no.2 MV-370.
When you
call the no.1 MV-370 gsm number,no.2 MV-370 will dial this specific number and
connect
| | |
| <<
Simple Steps>> | |
Step 1. Change the Network setting if you need (Network/network setting)
Step 2. Register SIP proxy Server or Asterisk or VoipBuster if you need (sip setting/service
domain)
Step 3. Set Route ( request )
| mobile
to lan: | | (1) | *,* --->it
is two stage dialing. | | | when mobile call
in,MV-370 will provide dial tone and you can enter ip or asterisk extension or
phone number. | | | ¡´ |
If you want to enter phone number,please note your asterisk need to have route
of destination number. | | (2) | *, specific
extension or IP or phone number | | | when mobile
call in,MV-370 will connect with this specific extension or IP or phone number
auto | | | ¡´ | If you want to set specific
phone number,please note your asterisk need to have route of destination number. |
| | | | Lan
to Mobile: | | (1) | *,* --->it is
two stage dialing. | | | when lan phone call
in,MV-370 will provide dial tone and you can enter mobile number. |
| (2) | *, specific mobile number | | | when
lan phone call in,MV-370 will connect with the specific mobile number auto. |
| (3) | *,#--->It is 1 stage dialing |
| | When lan phone and MV-370 both register Asterisk,
you can dial any destination number from lan phone directly. | | | ¡´ |
Please note:Asterisk need to set route of destination number that dial out from
MV-370 | ¡´All changes both need to click "save and change" |
| | | If
your control room is usually no body there,you can consider our smart power monitor(IP
power switch/ PSTN power switch)- It can remote power on/off ,reboot via PSTN
or WEB. More
detail.. |
| |
